Connect it and leave it. BLUETTI 200W solar panel is set to keep your solar generators juiced as long as there is sunlight available.
23.4% High Efficiency
Built with monocrystalline solar cells, the PV200 can convert up to 23.4% of sunlight into solar energy, charging your solar generators even in bad weather.
Easy Setup With Kickstand
Unfold the PV200, snap the kickstands, adjust the angle to maximize the amount of sunlight, and you're ready to harness solar energy for your generators.
(The recharging time refers to 80% of power level being charged*)
BLUETTI EB55 (537Wh) + PV200: Charge in as soon as 3 hours
BLUETTI AC200P (2,000Wh) + 2*PV200: Charge in as soon as 5.5 hours
BLUETTI AC200MAX (2,048Wh) + 4*PV200: Charge in as soon as 3 hours
BLUETTI AC300 + B300 (3,072Wh) + 8*PV200: Charge in as soon as 2.5 hours
BLUETTI EP500 (5,120Wh) + 6*PV200: Charge in as soon as 4.5 hours
Built to Last
The ETFE coating and IP65 junction box are designed to withstand any scratches and watersplash, perfect for camping, fishing, hiking and much more.(Prevent exposure to rain or no soak in water)
Portable in Every Way
Never Run Out of Power
Suitable for various occasions
Specifications
PREVIEW
POWER
Power:
Lamination:
Cell Type:
Cell Efficiency:
Voltage at Max Power(Vmp):
Current at Max Power(Imp):
Open Circuit Voltage(OCV):
Short Circuit Current(Isc):
200W
ETFE (Ethylene tetrafluoroethylene)
Monocrystalline Silicon
Up to 23.4%
20.5V
9.7A
26.1V
10.3A
GENERAL
Connector:
Weight:
Dimensions (Unfolded):
Dimensions (Folded) :
Operating Temperature:
Best Working Temperature:
Cable Length:
Certifications:
Warranty:
Standard MC4 Connector
16.1lbs (7.3kg)
23.2 × 89.2in (59 × 226.5cm)
23.2 × 24.8inch (59 × 63cm)
14-149℉ (-10-65℃)
77℉ (25℃)
118in (3m)
FCC, CE, ROHS
12 Months
IN THE BOX
User Manual
BLUETTI PV200/220 Solar Panel | 200W/220W User Manual
Yes. IP65 is rated for junction box. Do not expose the solar panel to rain or snow.
No
Under the same condition, BLUETTI PV series solar panels produce more power from limited sunlight.*
* Conclusion from BLUETTI Lab, for reference ONLY.
Most solar power stations on the market, and one PV200 solar panel is ideal for BLUETTI EB55/EB70S/AC50S portable power stations.
Yes, as long as they
(1) have MC4 connectors;
(2) support the output specifications of BLUETTI solar panels.
Review the PV input requirements of the solar generator.
Review the output specifications of solar panels.
Calculate the total voltage, current, and wattage of solar panels.
Consider the solar input connectors.
No. Your solar panels should be the same type and rating from one brand. For example, two PV200 to charge BLUETTI AC200P is acceptable, and one PV200 + one SP200 is unacceptable.
No. BLUETTI PV200 only has MC4 connectors.
These steps will help you get the most out of your solar panels:
1. Set up your panels correctly: The orientation as well as the angle it tilts at should be right.
2. Avoid shadow areas: Any amount of shadow will affect solar panel production.
3. Keep your panels clean: Dirt or debris reduces the panel’s efficiency.
4. Don’t get panels too hot: Good air circulation or a cool atmosphere around panels will help.
MPPT.
It is recommended to not have any cover when using.
How-to
Product Application
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
